1/4″ OD x 50′ SAE J844 Nylon Air Brake Tubing Suspenion Horn Train Lowrider

#ad
#ad
Power Products C604 #ad - 1/4" od x 50' sae j844 nylon Air Brake Tubing.

More information about Power Products C604 #ad

Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock 1/4 inch tee

#ad
#ad
Utah Pneumatic #ad - Except air and water, don't attempt to use the fittings on other fluids 2. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. User's Guide 1. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET.

Always use proper tool to tighten external hexagonal and internal hexagonal parts of the tube fitting. Always apply recommended torque on screws otherwise extra torque might damage thread and cause air leakage while insufficient torque might cause loose screws and air leakage. After screws are tightened, you may adjust the direction of tubing with most of our tube joint.

Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock 1/4 inch tee #ad - If it is hard in adjustment, you may apply recommended torque to turn screw to adjust direction of tubing. The tube fitting is prohibited if water temperature is above 60'C 4. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. The tube fitting is prohibited where spark and fire might be occurred 3.

. Never apply tube joint with additional external loadbending, twist or pulling, otherwise damage or leakage will be occurred. Caution check the end of tubing for a right angle cutting and check the external surface of tubing for any damage or scratch.

More information about Utah Pneumatic #ad


Similar products



utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch Straight od Push Fit Fittings Tube Fittings Push Lock 1/4" Straight

#ad
#ad
Utah Pneumatic #ad - Except air and water, don't attempt to use the fittings on other fluids 2. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Always use proper tool to tighten external hexagonal and internal hexagonal parts of the tube fitting. Always apply recommended torque on screws otherwise extra torque might damage thread and cause air leakage while insufficient torque might cause loose screws and air leakage.

After screws are tightened, you may adjust the direction of tubing with most of our tube joint. If it is hard in adjustment, you may apply recommended torque to turn screw to adjust direction of tubing. User's Guide 1. Never apply tube joint with additional external loadbending, twist or pulling, otherwise damage or leakage will be occurred.

utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch Straight od Push Fit Fittings Tube Fittings Push Lock 1/4" Straight #ad - Caution check the end of tubing for a right angle cutting and check the external surface of tubing for any damage or scratch. Please refer to following instruction in connection of tubing. When you insert the air tubing into the joint, you will have two-step feeling. Section one is locking claw and section two is sealing ring.

Must insert tube into section two. Sleeve is used in tubing connection and disconnection.

More information about Utah Pneumatic #ad


Similar products



PneumaticPlus PC-1/4-N2 Push to Connect Tube Fitting, Male Straight - 1/4" Tube OD x 1/4" NPT Thread Pack of 10

#ad
#ad
PneumaticPlus #ad - The release ring adapts the ellipse design to make it more convenient and laborsaving for disconnector. All taper thereads are pre-coated with Teflon with fine seal performance. All fitting s equipped with the internal hexagonal holes. It's easy for them to be mounted in narrow place. Body style: Male Straight.

Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Fluid type: Air Only. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Elliptical sleeve configuration is ideal for easy to push and release the tubing.

PneumaticPlus PC-1/4-N2 Push to Connect Tube Fitting, Male Straight - 1/4" Tube OD x 1/4" NPT Thread Pack of 10 #ad - The tube fittings come in a wide variety of models to meet all your needs in penumatic piping. Even after installation, the direction of tubing can be changed freely. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing.

More information about PneumaticPlus #ad


Similar products



10 Pieces pneumatic 1/4" Tube x 1/8" NPT Swivel "L" push to connect fitting

#ad
#ad
Liberty Pneumatics #ad - Check out my other items! _gsrx_vers_418 GS 6. 06 418 type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. If you with 14 days of receipt, you decide for any reason that you want to return this item, simply a contact us to let us know and b ship it back to us and we will give you a full refund if the item is in like new condition upon receipt.

Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. 1/4" tube od x 1/4" nPT Thread. Fluid type: Air Only. The tube fittings come in a wide variety of models to meet all your needs in penumatic piping. Even after installation, the direction of tubing can be changed freely.

10 Pieces pneumatic 1/4" Tube x 1/8" NPT Swivel "L" push to connect fitting #ad - This product comes with 2 warranties: 1 Our 14 day no questions ask warranty. Elliptical sleeve configuration is ideal for easy to push and release the tubing. Applicable Tube: Polyurethane and Nylon. Fluid:air, vacuum, water pressure range:0-1mpa120 psi max pressure:1. 5 mpa temperature range 0-60'c applicable Tube:PU/NYLON/Soft PE hose.

More information about Liberty Pneumatics #ad


Similar products



PneumaticPlus PN15 Series Push to Connect Tube Fitting, Male Elbow 1/4" Tube X 1/4" NPT - Pack of 5

#ad
#ad
PneumaticPlus PN15 1/4 1/4 #ad - Elliptical sleeve configuration is ideal for easy to push and release the tubing. The tube fittings come in a wide variety of models to meet all your needs in penumatic piping. Even after installation, the direction of tubing can be changed freely. Working temp. 4 ~ 160 fahrenheit/ Max. The release ring adapts the ellipse design to make it more convenient and laborsaving for disconnector.

All taper thereads are pre-coated with Teflon with fine seal performance. All fitting s equipped with the internal hexagonal holes. It's easy for them to be mounted in narrow place. Body style: Male Straight. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29.

PneumaticPlus PN15 Series Push to Connect Tube Fitting, Male Elbow 1/4" Tube X 1/4" NPT - Pack of 5 #ad - 5 in Hg. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET.

More information about PneumaticPlus PN15 1/4 1/4 #ad


Similar products



AIR LIFT 26229 200-psi Dual Needle Air Gauge

#ad
#ad
Air Lift 26229 #ad - To connect, simply push the straight-cut tubing Outer Diameter in metal sleeve; the stainless steel teeth grip onto the tubing and lock it. 1/4" od tubing x 1/4" npt male nominal ourside Pipe Diameter OD: 054". Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC. Proof pressure:| 120psi.

Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. A dual needle 200 psi gauge with manual and paddle valves and mounting bracket installed for front and rear control. Black finish on switch panel. Fluid type: Air Only. The release ring adapts the ellipse design to make it more convenient and laborsaving for disconnector.

AIR LIFT 26229 200-psi Dual Needle Air Gauge #ad - All taper thereads are pre-coated with Teflon with fine seal performance. All fitting s equipped with the internal hexagonal holes. It's easy for them to be mounted in narrow place. Body style: Male Straight. Fluid:air, vacuum, water pressure range:0-1mpa120 psi max pressure:1. 5 mpa temperature range 0-60'c applicable Tube:PU/NYLON/Soft PE hose.

Quick installation, simple and flexible, space-saving.

More information about Air Lift 26229 #ad


Similar products



Viair 90005 Tank Port Fittings Kit

#ad
#ad
Viair 90005 #ad - Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Fluid type: Air Only. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. Pn series is high performing, extremely compact push-in full metal fitting.

Recommended tubing: polyurethane, nylon, Air Suspension, air compressor, Pneumatic Tools, Polyethylene / Application: Air Bag, and etc. 200psi dual needle gauge. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Black finish on switch panel. Elliptical sleeve configuration is ideal for easy to push and release the tubing.

Viair 90005 Tank Port Fittings Kit #ad - Thread sealant is recommended for use with all brass fittings. Working press: 261 PSI. The tube fittings come in a wide variety of models to meet all your needs in penumatic piping. Even after installation, the direction of tubing can be changed freely. All brass construction.

More information about Viair 90005 #ad


Similar products



Air Lift 21703 Paddle Valve Switch

#ad
#ad
Air Lift 21703 #ad - Works with 1/4" od airline only Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Applicable Tube: Polyurethane and Nylon. To connect, simply push the straight-cut tubing Outer Diameter in metal sleeve; the stainless steel teeth grip onto the tubing and lock it.

Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. The tube fittings come in a wide variety of models to meet all your needs in penumatic piping. Even after installation, the direction of tubing can be changed freely. Manual paddle switch for Manual Control of suspension bags as well as load support bags.

Air Lift 21703 Paddle Valve Switch #ad - Working temp. 4 ~ 160 fahrenheit/ Max. Includes detailed instructions. The release ring adapts the ellipse design to make it more convenient and laborsaving for disconnector. All taper thereads are pre-coated with Teflon with fine seal performance. All fitting s equipped with the internal hexagonal holes. It's easy for them to be mounted in narrow place.

Body style: Male Straight.

More information about Air Lift 21703 #ad


Similar products



10 Pieces pneumatic 1/4" OD Tube x 1/8" NPT Push to connect one touch fitting

#ad
#ad
Liberty Pneumatics #ad - Black finish on switch panel. Recommended tubing: polyurethane, polyethylene / Application: Air Bag, Nylon, Pneumatic Tools, Air Suspension, air compressor, and etc. 200psi dual needle gauge. Always use a drain cock and a safety release valve when installing an onboard air system. Elliptical sleeve configuration is ideal for easy to push and release the tubing.

Working press: 261 PSI. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Product dimension LxWxH: 3. 5x3. 5x1. All brass construction. It is also backed by our 1 year quality warranty. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29.

10 Pieces pneumatic 1/4" OD Tube x 1/8" NPT Push to connect one touch fitting #ad - 5 in Hg. Applicable Tube: Polyurethane and Nylon. This is done to protect you the buyer. Fluid type: Air Only.

More information about Liberty Pneumatics #ad


Similar products



1/4" Tube OD x 1/8" NPT Thread Pack of 10 - PneumaticPlus PC-1/4-N1 Push to Connect Tube Fitting, Male Straight

#ad
#ad
PneumaticPlus #ad - Fluid type: Air Only. Black finish on switch panel. Applicable Tube: Polyurethane and Nylon. The tube fittings come in a wide variety of models to meet all your needs in penumatic piping. Even after installation, the direction of tubing can be changed freely. 1/4" od tubing x 1/4" npt male nominal ourside Pipe Diameter OD: 0

54". The release ring adapts the ellipse design to make it more convenient and laborsaving for disconnector. All taper thereads are pre-coated with Teflon with fine seal performance. All fitting s equipped with the internal hexagonal holes. It's easy for them to be mounted in narrow place. Body style: Male Straight.

1/4" Tube OD x 1/8" NPT Thread Pack of 10 - PneumaticPlus PC-1/4-N1 Push to Connect Tube Fitting, Male Straight #ad - Air lift 21703 Paddle Switch. Working temp. 4 ~ 160 fahrenheit/ Max. Pn series is high performing, extremely compact push-in full metal fitting. Always use a drain cock and a safety release valve when installing an onboard air system. 2 manual paddle valves. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC.

More information about PneumaticPlus #ad


Similar products