AMTECH NC-559-V2-TF Solder Flux – 30cc Dispensing Kit Including Plunger and Tip

High temperature compatible up to 300°c/600°f. Low electrochemical migration. Surface insulation resistant. Amtech nc-559-v2-tf no-clean tacky solder flux 30cc dispensing Kit Optimal viscosity - 40-52 malcom @ 10 rpm/25°c x103mpa/s. No copper mirror breakthrough.

---

Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length

4-3/4" 120mm length. Non-magnetic stainless steel construction resists corrosion. The company, founded in 1984, is headquartered in Valencia, CA. The non-magnetic stainless steel construction resists corrosion. The fine-point tips provide access to tight areas and are used for delicate precision work. The tweezers is 4-3/4" 120mm long.

American hakko Products manufactures soldering and desoldering tools. Pattern 3 tweezers with very-fine point tips for use in electronics assembly. The hakko chp 3-sa pattern 3 tweezers with very-fine points have a smooth shaft for use in electronics assembly applications. Non-serrated tip for delicate applications.

Smooth shaft for general handling and positioning applications.


Similar products

---

Solder 63/37 .015 DIA. 1LB SPOOL

Standard core 66 3. 3% flux. High activity rison core formulation. Non-magnetic stainless steel construction resists corrosion. Kester 44 rosin flux has virtually dominated the field of activated rosin core solders for well over four decades. The high mobility and fast-spreading action of this flux results in more reliable production line soldering.

Leaves bright/shiny solder joints after reflow. 4-3/4" 120mm length. An outstanding performance feature of this flux is the "instant-action" wetting behavior. Pattern 3 tweezers with very-fine point tips for use in electronics assembly. Excellent solderability to a wide variety of metallizations. Non-serrated tip for delicate applications.

Smooth shaft for general handling and positioning applications. Kester 44 rosin flux is an activated rosin formula for use in flux-cored solder wire. Industry standard for decades.


Similar products

---

Hakko CHP 7-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Curved Tips, 4-1/2" Length

Excellent solderability to a wide variety of metallizations. Non-serrated tip for delicate applications. The tweezers is 4-1/2" 118mm long. American hakko Products manufactures soldering and desoldering tools. 4-3/4" 120mm length. The company, founded in 1984, is headquartered in Valencia, CA. High activity rison core formulation.

4-1/2" 118mm length. Standard core 66 3. 3% flux. Pattern 7 tweezers with very-fine point and curved tips for use in electronics assembly. Smooth shaft for general handling and positioning applications. Pattern 3 tweezers with very-fine point tips for use in electronics assembly. Curved tines ease gripping in high-density areas.

Leaves bright/shiny solder joints after reflow. The curved tines ease gripping in high-density areas. Industry standard for decades. The non-magnetic stainless steel construction resists corrosion. Smooth shaft for general handling and positioning applications. Non-magnetic stainless steel construction resists corrosion.




Similar products

---

Hakko Soldering Station, FX-951-66

Standard core 66 3. 3% flux. Non-magnetic stainless steel construction resists corrosion. 4-1/2" 118mm length. No. 4-3/4" 120mm length. Non-magnetic stainless steel construction resists corrosion. Fm-2027 soldering handpiece and fh-200 series Holder ' Pattern 3 tweezers with very-fine point tips for use in electronics assembly.

Leaves bright/shiny solder joints after reflow. Accuracy f: greater than +/-27 Degrees Country of Origin subject to change: Japan. Excellent solderability to a wide variety of metallizations. Industry standard for decades. Smooth shaft for general handling and positioning applications. High activity rison core formulation.

Fm-2027 soldering handpiece and fh-200 series holder voltage: 120 watts: 75 item: soldering station temp. Non-serrated tip for delicate applications. Pattern 7 tweezers with very-fine point and curved tips for use in electronics assembly. Range f: 400 degrees to 840 degrees features: ESD Safe, Closed Loop Sensor Application: Soldering Type: Digital Temp.

Smooth shaft for general handling and positioning applications.


Similar products

---

Kester 24-6337-0010 44 Rosin Core Solder 63/37 .020 1 lb. SPOOL

Non-magnetic stainless steel construction resists corrosion. Price for: each includes: mfr. High activity rison core formulation. An outstanding performance feature of this flux is the "instant-action" wetting behavior. Smooth shaft for general handling and positioning applications. Excellent solderability to a wide variety of metallization's.

Non-serrated tip for delicate applications. Non-magnetic stainless steel construction resists corrosion. Leaves bright/shiny solder joints after reflow. Curved tines ease gripping in high-density areas. Kester 44 rosin flux has virtually dominated the field of activated rosin core solders for well over four decades.

. 4-1/2" 118mm length. Pattern 3 tweezers with very-fine point tips for use in electronics assembly. Standard core 66 3. 3 percent flux. Standard core 66 3. 3% flux. Industry standard for decades.


Similar products

---

Remington Industries 40SNSP.25 40 AWG Magnet Wire, Enameled Copper Wire, 4 oz, 0.0034" Diameter, 8304' Length, Natural

Leaves bright/shiny solder joints after reflow. Price for: each includes: mfr. Nema description: MW-79-C. No. High activity rison core formulation. Smooth shaft for general handling and positioning applications. Pattern 3 tweezers with very-fine point tips for use in electronics assembly. The insulation is made from modified Polyurethane, and protects the coiled wire from short-circuiting.

This magnet wire meets the nema mw-79-c standard for operating temperature 155°C/311°F and insulation makeup. Fm-2027 soldering handpiece and fh-200 series holder voltage: 120 watts: 75 item: soldering station temp. Length: 8, 304 Feet. Industry standard for decades. Leaves bright/shiny solder joints after reflow.

Insulation: Solder able Polyurethane. Excellent solderability to a wide variety of metallizations. Pattern 7 tweezers with very-fine point and curved tips for use in electronics assembly. 4-3/4" 120mm length. High activity rosin core formulation. Raw copper is drawn to meet specific size requirements based on the National Electrical Manufacturer’s Association NEMA standards.




Similar products

---

AmScope LED-144W-ZK White Adjustable 144 LED Ring Light Illuminator for Stereo Microscope & Camera

High activity rosin core formulation. The ring light has 2. 5" 62. 5mm inside and 3. 64" 92. 5mm overall outside diameters. Standard core 66 3. 3 percent flux. Excellent solderability to a wide variety of metallization's. Excellent solderability to a wide variety of metallizations. Non-magnetic stainless steel construction resists corrosion.

Nema description: MW-79-C. With variable intensity control, even, it provides cool, intense and focused shadow-free illumination. Fm-2027 soldering handpiece and fh-200 series holder voltage: 120 watts: 75 item: soldering station temp. Leaves bright/shiny solder joints after reflow. Non-serrated tip for delicate applications.

Industry standard for decades. Standard core 66 3. 3% flux. Non-magnetic stainless steel construction resists corrosion. Smooth shaft for general handling and positioning applications. It works with power supplies from a 100-240V and comes with a 1-7/8" 48 mm in diameter ring adapter. Pattern 7 tweezers with very-fine point and curved tips for use in electronics assembly.




Similar products

---

Hakko FM2032-51 Micro Soldering Handpiece, Blue tip not included

The fm2032 esd safe soldering iron uses the quick change T30 Series composite micro soldering tips that have geometries engineered for optimal heat transfer and the ability to reach into tight areas. 1-7/8" 48 mm in diameter ring adapter included. Price for: each includes: mfr. Hakko fm2032 micro soldering iron the new fm2032 micro Soldering Iron extends precision micro soldering capabilities to a variety of HAKKO soldering and rework systems.

Nema description: MW-79-C. Range f: 400 degrees to 840 degrees features: ESD Safe, Closed Loop Sensor Application: Soldering Type: Digital Temp. Fm-2027 soldering handpiece and fh-200 series holder voltage: 120 watts: 75 item: soldering station temp. Excellent solderability to a wide variety of metallization's.

Quick change T30 series tips not included. Insulation: Solder able Polyurethane. Pattern 3 tweezers with very-fine point tips for use in electronics assembly. Excellent solderability to a wide variety of metallizations. This iron is provided with a thin, burn resistant cord and cool running grip, which cools the grip nice and cool even when operating at 450C for extended periods of time.

Accuracy f: greater than +/-27 Degrees Country of Origin subject to change: Japan. Works with your hakko high end stations fx-951, fm-203 or fm-206.


Similar products

---

Remington Industries 34SNSP.25 34 AWG Magnet Wire, Enameled Copper Wire, 4 oz, 0.0069" Diameter, 2022' Length, Natural

Excellent solderability to a wide variety of metallization's. Build: single Min-Nom. Insulation: Solder able Polyurethane. Non-magnetic stainless steel construction resists corrosion. Price for: each includes: mfr. Sd safe design. 2. 5" 62. 5mm inside and 3. 64" 92. 5mm overall outside diameters. Provides intense and focused shadow-free illumination.

Curved tines ease gripping in high-density areas. This magnet wire meets the nema mw-79-c standard for operating temperature 155°C/311°F and insulation makeup. Industry standard for decades. Raw copper is drawn to meet specific size requirements based on the National Electrical Manufacturer’s Association NEMA standards.

Nema description: MW-79-C. Non-serrated tip for delicate applications. Nema description: MW-79-C. Length: 2, 022 Feet. Pattern 3 tweezers with very-fine point tips for use in electronics assembly. Excellent solderability to a wide variety of metallizations.


Similar products

---

MG Chemicals 4860P 63/37 No Clean, Leaded Solder Paste, 35 g 1.2 oz Pneumatic Dispenser Complete with Plunger & Dispensing Tip

Leaves bright/shiny solder joints after reflow. Non-serrated tip for delicate applications. Quick change T30 series tips not included. Excellent solderability to a wide variety of metallization's. Price for: each includes: mfr. Easily Dispensed. Build: single Min-Nom. Standard core 66 3. 3 percent flux. Length: 2, 022 Feet.

No. Curved tines ease gripping in high-density areas. 2. 5" 62. 5mm inside and 3. 64" 92. 5mm overall outside diameters. Accuracy f: greater than +/-27 Degrees Country of Origin subject to change: Japan. Industry standard for decades. 4-3/4" 120mm length. Range f: 400 degrees to 840 degrees features: ESD Safe, Closed Loop Sensor Application: Soldering Type: Digital Temp.

Temperature rating: 155°C 311°F. Standard core 66 3. 3% flux.


Similar products