Estes Standard Engine Igniter Plug, Magenta/Yellow


Estes 2251 - Rocket Accessory. Est2251 2251 standard igniter plug 5 Magenta/5 Green Used with all standard engines. 20 of each color.

More information about Estes 2251

Estes 2274 Recovery Wadding


Estes 2274 - Estes 2274 Recovery Wadding - Required for most rockets. Estes recovery Wadding keeps your parachute in perfect shape when used properly. If your rocket is precious, consider one of Model Rocket Shop's Recovery Upgrade Kits with Kevlar, Nomex and a nylon parachute. Flame resistant. Contains 75 Sheets. The leading cause of unsuccessful flights is failure of recovery deployment.

Enough for 18-25 flights. Replacing estes fragile knicker elastic shock cord and "bin-liner" parachute and using permanently attached Nomex cloth instead of paper wadding can lengthen the service life of your missile! Rocket Accessory.

More information about Estes 2274


Similar products



Estes Model Rocket Igniters Pack of 6


Estes - Estes Model Rocket Igniters Pack of 6 - Rocket Accessory. Flame resistant. Enough for 18-25 flights. Tools, construction and finishing supplies sold separately. Required for most rockets. In order to launch, model rocket engines, a launch system, igniters and recovery wadding are required - sold separately-unless otherwise specified. Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12.

Unless otherwise specified, all models require assembly. Contains 75 Sheets. Model rocket igniters come in a convenient six pack. It's always a good idea to have a few spares.

More information about Estes


Similar products



Estes A8-3 Engine Pack 3-Each


- It's always a good idea to have a few spares. Model rocket igniters come in a convenient six pack. Required for most rockets. A8-3 engines, 3 - starters, 4 - Starter Plugs. This engine is a standard engine designed for flights in rockets weighing less than 3 ounces, including the engine. Single stage engine. Enough for 18-25 flights.

Estes A8-3 Engine Pack 3-Each - Flame resistant. Rocket Accessory. Contains 75 Sheets.

More information about


Similar products



Devcon 90225 Duco Plastic and Model Cement - 0.5 oz.


Devcon 90225 - Flammable, keep away from heat, sparks and open flame. Handling time: 10 minutes; Set time: 2 hours; Cure time: 24 hours. Model rocket igniters come in a convenient six pack. Tensile strength: 300 PSI. Ideal for bonding polystyrene plastic models and toys. It's always a good idea to have a few spares. Before the cement cures, remove the tape.

Dries clear, with a tensile strength of 300 PSI. This engine is a standard engine designed for flights in rockets weighing less than 3 ounces, including the engine. A8-3 engines, 3 - starters, 4 - Starter Plugs. Enough for 18-25 flights. Rocket Accessory. Contains 75 Sheets. Required for most rockets. Temperature Range: 200°F.

Devcon 90225 Duco Plastic and Model Cement - 0.5 oz. - Devcon duco plastic and Model Cement is ideal for bonding polystyrene plastic models and toys. Single stage engine. Flame resistant. Dries clear.

More information about Devcon 90225


Similar products



Estes Tandem-X Flying Model Rocket Launch Set


Estes 1469 - Recommended engines: a8-3 first flight, C6-5, B4-4, B6-4, C6-7. Tools, model rocket engines, construction and finishing supplies sold separately. A8-3 engines, 3 - starters, 4 - Starter Plugs. Flame resistant. Single stage engine. In order to launch, starters and recovery wadding are required - sold separately.

This engine is a standard engine designed for flights in rockets weighing less than 3 ounces, including the engine. Enough for 18-25 flights. Ideal for bonding polystyrene plastic models and toys. Tensile strength: 300 PSI. Dries clear. Required for most rockets. It's always a good idea to have a few spares. Contains 75 Sheets.

Estes Tandem-X Flying Model Rocket Launch Set - Flammable, keep away from heat, sparks and open flame. This bullet can reach cloud busting heights up to 1, 200 feet. Handling time: 10 minutes; Set time: 2 hours; Cure time: 24 hours. The amazon is quick and easy to assemble, this huge rocket, standing 30in tall, can reach heights over 650 feet with recovery on a colorful 18 inch preassembled parachute.

The crossfire can easily be built in about a day and features a totally streamlined shape with aerodynamic fins and nose cone.

More information about Estes 1469


Similar products



Estes C6-5 Model Rocket Engine 3/pk. by Estes


Estes Cox Corporation - This bullet can reach cloud busting heights up to 1, 200 feet. Ideal for bonding polystyrene plastic models and toys. It's always a good idea to have a few spares. Required for most rockets. Enough for 18-25 flights. Flame resistant. In order to launch, starters and recovery wadding are required - sold separately.

Contains 75 Sheets. Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Model rocket igniters come in a convenient six pack. A8-3 engines, 3 - starters, 4 - Starter Plugs. This engine is a standard engine designed for flights in rockets weighing less than 3 ounces, including the engine.

Estes C6-5 Model Rocket Engine 3/pk. by Estes - The amazon is quick and easy to assemble, this huge rocket, standing 30in tall, can reach heights over 650 feet with recovery on a colorful 18 inch preassembled parachute. The crossfire can easily be built in about a day and features a totally streamlined shape with aerodynamic fins and nose cone. Rocket Accessory.

Dries clear. Flammable, keep away from heat, sparks and open flame. Recommended engines: a8-3 first flight, B6-4, B4-4, C6-5, C6-7.

More information about Estes Cox Corporation


Similar products



Estes Alpha III Rocket Launch Set


Estes 1427 - Flies over 1100'. Required for most rockets. The amazon is quick and easy to assemble, this huge rocket, standing 30in tall, can reach heights over 650 feet with recovery on a colorful 18 inch preassembled parachute. The crossfire can easily be built in about a day and features a totally streamlined shape with aerodynamic fins and nose cone.

This bullet can reach cloud busting heights up to 1, 200 feet. Flame resistant. Tensile strength: 300 PSI. A "first-flight" engine recommendation is generally made for each rocket kit. 34 gdimensions*12. 3 x 098" h x wrequired components not includedrocket engine with starter, the vertical distance from the lowest to highest point; W is width, such as Estes 001598 A8-3 EngineRecovery Wadding, such as Estes 002274 Wadding*H is height, the horizontal distance from left to right.

Estes Alpha III Rocket Launch Set - A model rocket kit includes reusable parts, and requires launching equipment and single-use launching supplies. Rocket kit assembly encompasses a range of skill levels—from Easy-to-Assemble E2X, gluing, requiring only simple gluing and less than an hour of time—to Level 5, requiring multi-step assembly with measuring, cutting, and painting tasks.

Requires model rocket engine, starters, recovery wadding, and glue all sold separately. Easy to assemble. This rocket launch set provides the equipment required to launch with required components the Alpha III rocket repeatedly and is suitable for youth group activities such as with clubs and schools.

More information about Estes 1427


Similar products



Estes A8-3, B6-4, C6-5 Mini Bulk Pack - 9 Engines / Motors with Starters


Estes - Dries clear. Contains 75 Sheets. Model rocket igniters come in a convenient six pack. The amazon is quick and easy to assemble, this huge rocket, standing 30in tall, can reach heights over 650 feet with recovery on a colorful 18 inch preassembled parachute. The crossfire can easily be built in about a day and features a totally streamlined shape with aerodynamic fins and nose cone.

A8-3 engines, 3 - starters, 4 - Starter Plugs. The a8-3 is used for first flights and small flying fields as you get used to how your rocket will perform and where it will land in your flying field. Flies over 1100'. Enough for 18-25 flights. In order to launch, starters and recovery wadding are required - sold separately.

Estes A8-3, B6-4, C6-5 Mini Bulk Pack - 9 Engines / Motors with Starters - Launch controller, launch pad, and rocket assembly kit with materials and instructions required to assemble the rocket. The c6-5's will provide almost double the altitude that the B6-4's can provide. Refer to the instructions or packaging that came with your model rocket for the engines you should be using.

This engine is a standard engine designed for flights in rockets weighing less than 3 ounces, including the engine. Estes model rocket engines are the standard in the model rocket industry for easy to use and reliable propulsion for your model rockets. Tensile strength: 300 PSI.

More information about Estes


Similar products



Estes C6-7 Rocket Engine


Estes Est 1615 - Orange plastic nose cone, body tube, one-piece plastic tail fin unit, and self-stick decals for level E2X Easy to Assemble assembly skill. Projected maximum altitude of 1, 100' 335m, 12" diameter parachute for rocket recovery. Handling time: 10 minutes; Set time: 2 hours; Cure time: 24 hours. Flame resistant.

In order to launch, starters and recovery wadding are required - sold separately. Launch controller, launch pad, and rocket assembly kit with materials and instructions required to assemble the rocket. Recommended for ages 10 and older with adult supervision up to age 12. Required for most rockets. This engine is a standard engine designed for flights in rockets weighing less than 3 ounces, including the engine.

Estes C6-7 Rocket Engine - Ideal for bonding polystyrene plastic models and toys. A8-3 engines, 3 - starters, 4 - Starter Plugs. Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Tensile strength: 300 PSI. Flies over 1100'. Launch system included Launchpad colors may vary. Flammable, keep away from heat, sparks and open flame.

More information about Estes Est 1615


Similar products



Estes 302215 Porta-Pad II Launch Pad


Estes 302215 - Recommended engines: a8-3 first flight, C6-5, B6-4, B4-4, C6-7. Tools, model rocket engines, construction and finishing supplies sold separately. Rocket Accessory. This engine is a standard engine designed for flights in rockets weighing less than 3 ounces, including the engine. In order to launch, starters and recovery wadding are required - sold separately.

Estes 302215 Porta-Pad II Launch Pad - Launch controller, launch pad, and rocket assembly kit with materials and instructions required to assemble the rocket. The best way to get engines in bulk without having to buy 24 of them. Estes engines are the model rocket industry standard. Ideal for bonding polystyrene plastic models and toys. Dries clear.

Tensile strength: 300 PSI. Ships usps parcel post only and cannot be shipped outside the contiguous US. Sturdy, plastic tripod design. Required for most rockets. Launch system included Launchpad colors may vary. This bullet can reach cloud busting heights up to 1, 200 feet. Launch rod, safety cap and key.

More information about Estes 302215


Similar products