As an Amazon Associate I earn from qualifying purchases.
Case Club #ad - Base foam is heavy duty, pre-cut, closed cell polyethylene which won't absorb moisture or oil. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states. Wide bodied snap latches can be used with thick gloves.
Easily convert the case from a 2 pistol accessory version to a 2 pistol with increased magazine capacity version by adding/leaving in, the magazine module. Magazine compartments are dual level & double stack mags of varying lengths.
Extended front handle length helps counter balance off center weighted loads. Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
Case Club #ad - Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states. Easily convert the case from a 5 pistol version to a 4 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear.
Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Case is 100% shippable and airline approved for TSA checked luggage.
Case has a lifetime warranty, mil-spec, is 100% waterproof ip67 & dustproof with a built-in pressure release valve. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. All latch & hinge pins are stainless steel. Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Wide bodied snap latches can be used with thick gloves.
Case Club #ad - Wide bodied snap latches can be used with thick gloves. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure. Base foam is heavy duty, closed cell polyethylene which won't absorb moisture or oil. Case is 100% shippable and airline approved for TSA checked luggage.
Magazine compartments are dual level & double stack mags of varying lengths. Easily convert the case from a 6 pistol & accessory version to a 6 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 12 while adding both modules increases it to 20 Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
Holds 6 pistols and up to 20 magazines with magazine modules or 8 magazines with accessory pocket +6 more in the magwells. Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case has a lifetime warranty, mil-spec, pre-cut, non-abrasive, is 100% waterproof ip67 & will fit both single & Dustproof with a built-in pressure release valve. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones.
Case Club #ad - Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure. Case is ideal for police departments, military, firearm instructors & those who have large pistol collections. Case has a lifetime warranty, non-abrasive, is 100% waterproof ip67 & dustproof with a built-in pressure release valve.
Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size. All latch & hinge pins are stainless steel. Extended front handle length helps counter balance off center weighted loads. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths.
Case Club #ad - Case has a lifetime warranty, non-abrasive, is 100% waterproof ip67 & will fit both single & dustproof with a built-in pressure release valve. Holds 6 pistols, 21 magazines +6 more in the magwells & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust.
Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure. Base foam is heavy duty, mil-spec, pre-cut, closed cell polyethylene which won't absorb moisture or oil.
Magazine compartments are dual level & double stack mags of varying lengths. Quickly convert it back to the 6 pistol version anytime by putting the module back in. Easily convert the case from a 6 pistol version to a 5 pistol & freeing up room for ammunition & accessory version by removing the pistol module & safety gear. Dual purpose foam design allows for two different configurations for the price of one! Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner.
Case Club #ad - Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
Easily convert the case from a 5 pistol & accessory version to a 5 pistol with increased magazine capacity version by adding/leaving in, the magazine modules.
Case is 100% shippable and airline approved for TSA checked luggage. Case has a lifetime warranty, is 100% waterproof ip67 & will fit both single & dustproof with a built-in pressure release valve. Base foam is heavy duty, mil-spec, non-abrasive, pre-cut, closed cell polyethylene which won't absorb moisture or oil. Wide bodied snap latches can be used with thick gloves. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones.
Case Club #ad - Waterproof case comes with precut foam to hold precision rifle and ar-15 or ar-10 rifle, along with a Semi-Auto Pistol. Does not accommodate side attachments.
Case is airline approved for checked luggage, wheeled, padlockable, fully shippable & dustproof. See image diagram for fitment guidance. Does not fit 26" barrel Ruger Precision Rifle models.
Case Club #ad - Magazine compartments are dual level & double stack mags of varying lengths. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones.
Extended front handle length helps counter balance off center weighted loads. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
Holds 3 pistols and up to 23 magazines with magazine modules or 9 magazines with accessory pocket +3 more in the magwells. Dual purpose foam design allows for three different configurations for the price of one! Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Easily convert the case from a 3 pistol & accessory version to a 3 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Case has a lifetime warranty, non-abrasive, pre-cut, is 100% waterproof ip67 & will fit both single & dustproof with a built-in pressure release valve.
Case Club #ad - Built in padlockable holes for extra security. Case comes with disposable razor blade that makes customization a breeze. Interior dimensions of the case measure 40"Lx 13.
5"w x 5. 0"h the case narrows to 11. 8"w in the center. 3 piece set of foam to allow full customization 1 convolute lid layer, a 2. 125" base cutout layer, and a 0625" bottom flat pad. Do not settle for cheap and flimsy diced foam! diced foam tears easily, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, retains water rust!, can be cleaned easily, lasts a lifetime, which does not absorb liquids, does NOT tear easily, collects dirt, and will NOT disintigrate.
Case Club #ad - Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. All latch & hinge pins are stainless steel. Easily convert the case from a 4 pistol version to a 3 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear.
Holds 4 pistols, 16 magazines +4 more in the magwells & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Magazine compartments are dual level & double stack mags of varying lengths.
Base foam is heavy duty, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Dual purpose foam design allows for two different configurations for the price of one! Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states. Quickly convert it back to the 4 pistol version anytime by putting the module back in.
1. Case Club
#adHeavy Duty, Case Club 2 Pistol & 18 Magazine Case with Accessory Pocket. Pre-Cut, Waterproof with Silica Gel for Gun Rust Prevention Upgraded Gen-2
#adEasily convert the case from a 2 pistol accessory version to a 2 pistol with increased magazine capacity version by adding/leaving in, the magazine module. Magazine compartments are dual level & double stack mags of varying lengths.
More information #ad
Adding the module increases magazine capacity to 18. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure. Case has a lifetime warranty, mil-spec, non-abrasive, is 100% waterproof ip67 & will fit both single & dustproof with a built-in pressure release valve. Extended front handle length helps counter balance off center weighted loads. Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | FBA_ASSYCC540SEPIS2A |
More information #ad
2. Case Club
#adCase Club 5 Pistol and 20 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust Upgraded Gen-2
#adPistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Case is 100% shippable and airline approved for TSA checked luggage.
More information #ad
Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Case has a lifetime warranty, mil-spec, is 100% waterproof ip67 & dustproof with a built-in pressure release valve. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. All latch & hinge pins are stainless steel. Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Wide bodied snap latches can be used with thick gloves.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Height | 7.48 Inches |
| Length | 19.75 Inches |
| Width | 15.53 Inches |
| Part Number | ASSYCC171163ISKPIS5 |
More information #ad
3. Case Club
#adCase Club 6 Pistol & 20 Magazine Case with Accessory Pocket. Pre-Cut, with Silica Gel for Gun Rust Prevention Upgraded Gen-2, Heavy Duty, Waterproof
#adMagazine compartments are dual level & double stack mags of varying lengths. Easily convert the case from a 6 pistol & accessory version to a 6 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 12 while adding both modules increases it to 20 Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
More information #ad
Quickly convert it back to the 6 pistol & accessory version anytime by removing the modules. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states. Holds 6 pistols and up to 20 magazines with magazine modules or 8 magazines with accessory pocket +6 more in the magwells. Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case has a lifetime warranty, mil-spec, pre-cut, non-abrasive, is 100% waterproof ip67 & will fit both single & Dustproof with a built-in pressure release valve. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | FBA_ASSYCC201173ISKPIS6A |
| Model | 6 Pistol & Accessory Case |
More information #ad
4. Case Club
#adCase Club 7 Pistol and 14 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust Upgraded Gen-2
#adAccommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
More information #ad
Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Base foam is heavy duty, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size. All latch & hinge pins are stainless steel. Extended front handle length helps counter balance off center weighted loads. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC201173ISKPIS7 |
| Model | 7 Pistol Case |
More information #ad
5. Case Club
#adCase Club 6 Pistol and 21 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust Upgraded Gen-2
#adMax length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure. Base foam is heavy duty, mil-spec, pre-cut, closed cell polyethylene which won't absorb moisture or oil.
More information #ad
Wide bodied snap latches can be used with thick gloves. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Magazine compartments are dual level & double stack mags of varying lengths. Quickly convert it back to the 6 pistol version anytime by putting the module back in. Easily convert the case from a 6 pistol version to a 5 pistol & freeing up room for ammunition & accessory version by removing the pistol module & safety gear. Dual purpose foam design allows for two different configurations for the price of one! Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC181373ISKPIS6 |
| Model | 6 Pistol Case |
More information #ad
6. Case Club
#adCase Club 5 Pistol and up to 30 Magazine with Accessory Pocket Pre-Cut Heavy Duty Waterproof Case with Silica Gel Canister to Help Prevent Gun Rust Upgraded Gen-2
#adEasily convert the case from a 5 pistol & accessory version to a 5 pistol with increased magazine capacity version by adding/leaving in, the magazine modules.
More information #ad
Dual purpose foam design allows for three different configurations for the price of one! Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Extended front handle length helps counter balance off center weighted loads. Case is 100% shippable and airline approved for TSA checked luggage. Case has a lifetime warranty, is 100% waterproof ip67 & will fit both single & dustproof with a built-in pressure release valve. Base foam is heavy duty, mil-spec, non-abrasive, pre-cut, closed cell polyethylene which won't absorb moisture or oil. Wide bodied snap latches can be used with thick gloves. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC720SEPIS5A |
More information #ad
7. Case Club
#adCase Club Precision and AR Rifle Pre-Cut Waterproof Case with Accessory Box and Silica Gel to Help Prevent Gun Rust Gen 2
#adCase is airline approved for checked luggage, wheeled, padlockable, fully shippable & dustproof. See image diagram for fitment guidance. Does not fit 26" barrel Ruger Precision Rifle models.
More information #ad
Foam insert is closed cell high grade polyethylene which can be wiped clean. All rpr owners should see our "RPR w/ Folding Stock Case" instead for a better fitment. 2 moisture removing silica gel canisters & waterproof accessory box & foam cutter are included. Also holds extra magazines, gun attachments, optics, & various accessories.| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC108187PLPREAR |
More information #ad
8. Case Club
#adCase Club 3 Pistol & Accessory & Up to 23 Magazines Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust Gen 2
#adExtended front handle length helps counter balance off center weighted loads. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
More information #ad
Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size. Base foam is heavy duty, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Holds 3 pistols and up to 23 magazines with magazine modules or 9 magazines with accessory pocket +3 more in the magwells. Dual purpose foam design allows for three different configurations for the price of one! Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Easily convert the case from a 3 pistol & accessory version to a 3 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Case has a lifetime warranty, non-abrasive, pre-cut, is 100% waterproof ip67 & will fit both single & dustproof with a built-in pressure release valve.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC171163ISKPIS3A |
More information #ad
9. Case Club
#adCase Club 40 Inch Rifle Carrying Case with Closed Cell Military Grade Polyethylene Foam
#ad5"w x 5. 0"h the case narrows to 11. 8"w in the center. 3 piece set of foam to allow full customization 1 convolute lid layer, a 2. 125" base cutout layer, and a 0625" bottom flat pad. Do not settle for cheap and flimsy diced foam! diced foam tears easily, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, retains water rust!, can be cleaned easily, lasts a lifetime, which does not absorb liquids, does NOT tear easily, collects dirt, and will NOT disintigrate.
More information #ad
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Height | 5 Inches |
| Length | 41.5 Inches |
| Weight | 7 Pounds |
| Width | 15 Inches |
| Part Number | CC6500CCFLPE |
More information #ad
10. Case Club
#adCase Club 4 Pistol and 16 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust Upgraded Gen-2
#adHolds 4 pistols, 16 magazines +4 more in the magwells & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Magazine compartments are dual level & double stack mags of varying lengths.
More information #ad
Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size. Base foam is heavy duty, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Dual purpose foam design allows for two different configurations for the price of one! Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states. Quickly convert it back to the 4 pistol version anytime by putting the module back in.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC540SEPIS4 |
More information #ad
