Top 10 Squat Bar Stand – Strength Training Dumbbell Racks

As an Amazon Associate I earn from qualifying purchases.

1. Yaheetech


Yaheetech Pair of Adjustable Squat Rack Standard 44-70 Inch Solid Steel Squat Stands Barbell Free-press Bench Home Gym Portable Dumbbell Racks Stands

Yaheetech #ad - Safe & secure:for added safety and stability, this adjustable squat rack uses selective metal nuts paired with quality washers. Please use a wrench to fasten the nuts.

Practical:ideal for squats and bench presses - Suitable for use with both standard and Olympic sized bars. Nuts cannot be fully tightened by hand. Anti-skid:the barbell bench press stands feet pads equipped with anti-skid to avoid damage to the floor, which also increased the security. Load 441 lb / 200 kg. High quality: squat dumbbell racks stands are made of heavy duty 50mm steel tube frame; Max. Adjustable:the barbell stands have 14 adjustable safety pins on each post to help you adjust to the appropriate height to meet your need(5cm gaps); adjustable Height 45-705inch / 114-179 cm.
BrandYaheetech #ad
ManufacturerYaheetech #ad
Height70.47 Inches
Length21.46 Inches
Weight43.9 Pounds
Width19.88 Inches
Part NumberYT-2073

2. F2C


F2C Max Load 550Lbs Pair of Adjustable 40"-66" Squat Rack Sturdy Steel Squat Barbell Free Bench Press Stands Gym/Home Gym Portable Dumbbell Racks Stands one Pair/Two pcs

F2C #ad - Please do not tighten the feet of each bracket until last. It's a portable rack set, they may cannot be fully tightened by hand, please make sure you are assisted during heavy training. The barbell stands features spotters for your safety with 14 positions5cm gaps, more ergonomic and safe, suitable for most people's workout needs.

Spotter and lock catch, please switch both pins into the other one to see if it works or contact us, double fixation ensures your safety. Rubber end caps protect your floor from scratching. If the pin won’t screw into place to attach it to the frame, thank you. Adjustable to fit your height: range from 40 - 66. 5 inch/103-168cm.

New nuts with blue rubber ring inside for more stability, please use a wrench to fasten the nuts. Maximum weight: 550 lbs minimum height and 440 lbs maximum height. Simple and portable design, but sturdy and good security features, suitable for standard and Olympic sized bars. Made of solid 50mm steel tube, the squat dumbbell racks stands is lightweight yet sturdy enough for your daily squats and bench presses.
BrandF2C #ad
ManufacturerF2C #ad
Height66.5 Inches
Length20.1 Inches
Weight18.5 Pounds
Width17.7 Inches
Part NumberF2C-S01

3. Sunny Health & Fitness


Sunny Health & Fitness Power Zone Squat Stand Power Rack Cage, SF-XF9931

Sunny Health & Fitness #ad - Olympic plate storage: this power rack includes safety clips, organize weights on racks while adding extra stability when utilizing the machine. Angled pull up bar: the pull-up bar on the power rack is adjustable and reversible with 8 different positions and angled for both wide and narrow grip pull-ups.

Weights NOT included. Heavy-duty frame: constructed with premium quality steel construction, this power rack supports up to an incredible 805 lbs. Included components: Squat Rack, Tool, User Manual, Hardware. Max weight capacity barbell. Olympic bars: Fits up to 7ft Olympic Bars. Note: when using resistance bands, weight plate storage should be fully stacked to prevent tipping over.

Resistance band posts: 6 resistance band pins 3 per side to increase versatility and add extra resistance to your lifts and squats. Spotter arms: you will always have a spotter in the Power Zone power rack with safety lock latches for ease of mind and safety assurance when squatting with heavier weights.
BrandSunny Health & Fitness #ad
ManufacturerSunny Health & Fitness #ad
Height87 Inches
Length38 Inches
Weight83 Pounds
Width53 Inches
Part NumberSF-XF9931
Warranty1yr / 180 day Manufacturer Warranty

4. XMark


Multi-Function, Adjustable, Bench Press, XMark Olympic Bar Squat Rack, Squat Rack Stand

XMark #ad - Ships freight: please note that products such as this, you will be responsible for freight charges both ways, weighing over 150 lbs, ship with a freight carrier. Space-saving design: with a footprint of 53" x 49. 5" x 73" assembled dims, this unit is just as well suited for garage gyms as large-scale training facilities.

Curbside delivery only and both a signature and a valid phone number are required. They are extremely easy to adjust and the rubber pads on them will protect your equipment from scratches. Rugged: with a 3" x 3" 11-gauge steel construction and 1000 lb weight capacity, clean pulls, the XM-9050 is a very sturdy multi-purpose rack with a wide base that is equally equipped for squats, bench, and floor presses. Adjustable: the twenty-three safety arm positions measuring 1.

5" and 3", included extra-long 23" safety spotters and J-hooks will give you confidence as you lift. No tool required to adjust the J-Hooks. If they are unable to contact you using the phone number provided and a freight shipment is returned, in addition to a 20% restocking fee. Versatile: the safety spotters go down to 20" and j-hooks go up to 61". An agent with the freight carrier will contact you to schedule delivery.
BrandXMark #ad
ManufacturerXMark #ad
Part NumberXM-9050-RED-RACK



Power Rack Cage Black, CANPA Multifunction Power Rack with Pull up Bar, Heavy Capacity and Adjustable Squat Stand Rack for Home Gym Equipment

CANPA #ad - The product has a 1 year warranty, quality is guaranteed and service is guaranteed. Extra strong load-bearing:professional fitness equipment engineers designed the front and rear double support squat rack plus 2" x 2" square steel pipe main frame can perfectly support the 800LBS weight.

Barbell plate storage:power stand with olympic plate storage bar at the back, can be a good storage of different weights of the barbell piece, while adding the barbell piece can further give you training large weight movements to enhance the sense of security. Standard 1in adjustment hole to accommodate most market accessories. More diverser pull-up bar:the versatile and sturdy pull-up bar can do pull-ups in different directions and movements to exercise different body muscles, adding to the integrity of the power rack function.

Adjstable barbell support arms & height:single-side 17-hole barbell support arm with random height plus the main frame 6-speed height adjustment weight rack, whether doing squats or bench press can be well adapted to different heights and different parts of the exercise needs. Guartantee:no-nonsense, no-difference professional service to handle any questions you may have about the product.
BrandCANPA #ad
ManufacturerCANPA #ad
Part NumberLMJ



Dip Bar Station Adjustable Bench Press Rack 850LBS Max Load Multi-Function Weight Lifting Home Gym, AKYEN Adjustable Squat Rack Stand, Barbell Rack

AKYEN #ad - Safe and securenon-slip foot pads protect the floor and ensure your safety, and the UVA material handgrips increase friction and minimize your hand fatigue. What you get1 x barbell rack, and 1-year warranty. 850lbs max loadcrafted from durable powder-coated, AKYEN squat stand can support up to 850LBS, heavy-gauge steel for enhanced structural strength, very sturdy and stable.

There is no need to worry about hand blisters even after a full day of continuous use. Please let us know if you need any help! Whatever the issue is, Manual, Assembly Tools, We will definitely give you a satisfactory solution. Adjustable heights & widthswith 15 adjustable heights46-72inch at 5cm increments and 4 adjustable widths25-43inch at 16.

5cm increments. No worry about its cracking under lasting burdening. A variety of combinations can be easily fitted for the whole family's exercise needs. 3-in-1 designwith the multi-functional design, dips, pull ups, push ups, bar exercises, the squat stand dip bar station, squat, shoulder press, overhead lifts, barbell stand allows you to easily do various exercises including bench press, leg raise and more.
BrandAKYEN #ad
ManufacturerAKYEN #ad
Height46 Inches
Length28 Inches
Width23.3 Inches
Part NumberJ07



800LBS Weight Capacity, ZENOVA Power Rack Squat Rack with Pull Up Bar Home Gym Fitness Pull Up Rack Squat Stand for Weightlifting

ZENOVA #ad - Increase an adjustable bench for added versatility. J hooks & spotter arms & dip bar the j-hook/spotter arms/dip bar have 11 level adjustable settings, range from 15'' to 71'', all these three items can be mounted at your preferred height for your excellent exercise training.

Versatilezenova multi-function power rack can provide you with a variety of exercises. Such as squat, deadlift, push-ups, pull-ups, dips, bench presses, single lifts and more.2 boxes may arrive separately. The power rack is packed in 2 boxes because of the heavy weight. Heavy-duty construction the power squat rack consists of a heavy-duty square steel frame construction 2''X2'' and a H-shape base. Rubber non-slip pads encase each foot to add safety, stability, and floor protection.

Reliabilityour strength training squat rack is design with multi-grip pull up bar handle to meet your workout needs, Durable powder coat finish and industrial zinc hardware provide exceptional maintenance free durability. 800lbs weight capacity give you a safe fitness experience. Guartantee assemble dimensions: 42. 42"l x 4018"w x 84. 65"h, the product has a 1 year warranty, quality is guaranteed and service is guaranteed.
BrandZENOVA #ad
ManufacturerGYM-ZENOVA #ad



Barbell Holder & T-Bar Row Landmine Support – Max Weight Capacity 770lbs Red, Dip Bar Station, STOZM 14-Gauge Steel Adjustable Squat Rack Stand/Barbell Rack with Weight Plate Storage

STOZM #ad - Stozm squat rack stand features all built-in accessories for extra convenience, including 1x dip bar station, 4x weight plate pegs, and 2x barbell holders. Simply loosen the knobs on the vertical & fitness levels: Take only 1 minute to adjust the barbell rack’s height & horizontal bars, extend the square tubes, and then tighten the knobs.

For all physiques & width to fit your need. All-in-one product: no need to invest in weight plate racks and barbell holders. Ideal to combine with stozM Weight Bench to perform incline/decline bench press, shoulder press & more. Build up full-body strength: whether you’re looking to bulk up, stozM Barbell Rack is what you need for your home gym practice. 14-gauge 2mm steel construction: stozm barbell rack is made of 14-gauge steel - thicker and stronger than other products on the market.

Use it to strengthen your chest, abs, tone up or just get a few reps in here & there, arms, shoulders, back, and legs. Steadier & more balanced design: the squat rack adopts safety knot technology, which keeps square tubes tightened to ensure no shaky movements. The premium & improved adjustable Barbell Rack can support a high weight capacity of 770lbs 350kg.
BrandSTOZM #ad
ManufacturerSTOZM #ad
Height5.91 Inches
Length42.52 Inches
Weight75 Pounds
Width27.56 Inches
Part NumberYT6C
Warranty5-year limited manufacture warranty



Weight Plate Holders, Pull Up Bars, HulkFit Pro Series Multi-Function Adjustable Weightlifting Squat Stand Rack, Black, J Hooks, Resistance Band Pegs, and Barbell Storage

HULKFIT #ad - Materials - heavy-duty 11 gauge steel with a powder coated finish. High density rubber. Purpose - add our pro series squat stand to your home gym and fitness equipment repertoire. Includes instructions and hardware.

Athletes can do sport specific strength training for Bodybuilding, Martial Arts, Crossfit, and more. Plate holders 19” x 2. 25” x 11. 6”, resistance Band Pegs 1025” x 1” diameter. Product specifications - overall dimensions 49. 6” x 46” x 805”, j hooks 5. 6” x 2. 75” x 5. 9”, pull up bar 43. 75” x 1” diameter and 2” diameter. What’s inside - 1 pro series squat stand, 2 Pull Up Bars, 2 weight Plate Holders, 2 j hooks, and 4 Resistance Band Pegs.

Designed to help increase lower body strength with deadlifts, lunges, squats, and other explosive exercises. Weight capacity 800 pounds. Usage - use your existing weight plates to help anchor the unit to the ground. Add our cable pulley System so you can exercise your lower and upper body.
BrandHULKFIT #ad
ManufacturerHulkFit #ad
Height80.5 Inches
Length49.6 Inches
Width46 Inches
Part NumberHFSS-1-BLK
Warranty2-Year Warranty



ZENOVA Power Tower Pull Up Bar Stand Pull Up Station Strength Training Equipment Multi-Function Gym Equipment for Pull Up /Dip/ Squat/ Bench Press

ZENOVA #ad - Quality guaranteedwe provide the assemble tools and instructions. If you encounter any problem or need further support, We will reply you within 24 hours and give customer satisfied solutions. The 6 levels adjustable backrest provide comfort during workout.

Flexiblepower tower and power rack 2 in 1, our gym power tower have removable elbow pads and barbell rests, you can easy change in the 2 pattern, meet your different need of home gym . Please search asin:b08tbjmlDD to find a compatible weight bench for weight lifting. Versatileour pull up dip station is versatile, vertical knee raises, a various of exercise can be done.

Like pull-ups and chin-ups, dip station, push-ups, weight press, squat training and so on It's an ideal exercise equipment for the whole body workout. Stabilityconstructed with u-shaped base 405’’x41’’and 1. 2 mm thickness steel frame, which can load heavy weight up to 400lbs, withstand long term use. Ergonomic designhumanized design with 2 inch thickness backrest and elbow pads, protect your spine during exercise.
BrandZENOVA #ad
ManufacturerGYM-ZENOVA #ad
Part Numberpts033