Top 7 Savage Picatinny Rail – Hunting Equipment

As an Amazon Associate I earn from qualifying purchases.

1. Monstrum

#ad

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles

#ad
Monstrum #ad - Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms. Allows for the mounting of Picatinny or Weaver standard scope rings, red dots, scope mounts, or other optics. Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required. 7 inches or 16 rail slots in length, allowing for flexible placement of optics for optimum eyerelief and cheek weld. All monstrum scope mounts and accessories come with a lifetime guarantee.
BrandMonstrum #ad
ManufacturerMonstrum #ad
Part NumberSAV-02

2. Evolution Gun Works

#ad

Evolution Gun Works Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA Ambidextrous

#ad
Evolution Gun Works #ad - Finish: matte Black Anodizing. Rail type: One Piece Picatinny. Height:. 4" top of receiver to Top of Picatinny, Weight: 2 oz. Machined from: domestic 6061 T6 Extruded Aluminum. Mounting hardware: #6-48 x 1/4 Screws and T-10 Bit Included.
BrandEvolution Gun Works #ad
ManufacturerEvolution Gun Works #ad
Weight4 ounces
Part Number41002
Model41002

3. Evolution Gun Works

#ad

Evolution Gun Works Savage Round Back Short Action Picatinny Rail Scope Mount 0 MOA 41000

#ad
Evolution Gun Works #ad - Rail type: One Piece Picatinny. Finish: matte Black Anodizing. Machined from: domestic 6061 T6 Extruded Aluminum. Center spread: 3. 930". Overall length: 6. 670".
BrandEvolution Gun Works #ad
ManufacturerEvolution Gun Works #ad
Weight4 ounces
Part Number41000
Model41000

4. WEAVER

#ad

Weaver 1-Piece Extended Multi-Slot Tactical Picatinny-Style 20 MOA Scope Base Savage 10 Series Short Action Matte

#ad
WEAVER #ad - Manufactured from 6061 T6 aluminum. Provide an additional 1 inch of forward length for more mounting options. Fits savage model 10 short action 4. 275” – 4. 4” spacing. Manufactured from 6061 T6 aluminum. Provide an additional 1 inch of forward length for more mounting options. Protected by a matte, Type III hard coat anodized finish. Picatinny bases are designed for specific models of firearms. No slip/strip Torx screws. Protected by a matte, Type III hard coat anodized finish.
BrandWEAVER #ad
ManufacturerVista Outdoor Sales LLC #ad
Height0 Inches
Length0.1 Inches
Weight0.24 Pounds
Width0.04 Inches
Part Number99496
ModelW-Parent

5. Outerimpact

#ad

Outerimpact Savage AccuTrigger Rounded Receiver Short Action Picatinny Scope Base with 20 MOA

#ad
Outerimpact #ad - Finish: matte black. Additional tools: T-10 Torx driver not included. Coating: type iii hard coat anodized 68 Rockwell. Please confirm that your receiver uses 6-48 screws.

Mounting hardware: four 4 6-48 weaver t-10 torx head screws included. There is a good chance you need a Picatinny Base that accommodates a "flat-back receiver" This is for SHORT action receivers. Please consult graphic with hole spacing measurements to determine if your receiver is a SHORT action. Compatible guns: savage accu-trigger round receiver: 10, 12, 16 *note: does not fit 10 ba or axis and axis ii. Moa: 20 Material: billet 6061-T6 aluminum. If your gun does not have an accu-Trigger, 11, 14, this will NOT work on your gun.
BrandOuterimpact #ad
ManufacturerOuterimpact #ad
Length6 Inches
Weight0.3 ounces
Part NumberOTL-SAVS20-PCAT02

6. Evolution Gun Works

#ad

Evolution Gun Works Savage Mark II 0 MOA Ambidextrous Picatinny Rail Scope Mount 41500

#ad
Evolution Gun Works #ad - Please note, newer savage mk ii rifles come with a 1-5/8" ejection port and utilize our Savage 93 scope mounts. Center spread: 3. 345"; overall length: 5. 882"; height:. 4" top of receiver to top of picatinny; weight: 2 oz. This mount fits savage MK II with 1-3/8" ejection port. Machined from domestic 6061 T6 Extruded Aluminum. Measure the size of your ejection port prior to ordering to ensure the right fit.
BrandEvolution Gun Works #ad
ManufacturerEvolution Gun Works #ad
Height1 Inches
Length1 Inches
Weight4 ounces
Width1 Inches
Part Number41500
Model41500

7. Outerimpact

#ad

Outerimpact Savage AccuTrigger Rounded Receiver Short Action Picatinny Scope Base with 0 MOA

#ad
Outerimpact #ad - Mounting hardware: four 4 6-48 weaver t-10 torx head screws included. Coating: type iii hard coat anodized 68 Rockwell. Moa: 0 If your gun does not have an accu-Trigger, 12, 14, this will NOT work on your gun.

There is a good chance you need a Picatinny Base that accommodates a "flat-back receiver" This is for SHORT action receivers. Please confirm that your receiver uses 6-48 screws. Compatible guns: savage accu-trigger round receiver: 10, 11, 16 *note: does not fit 10 ba or axis and axis ii. Finish: matte black, material: Billet 6061-T6 aluminum. Additional tools: T-10 Torx driver not included. Please consult graphic with hole spacing measurements to determine if your receiver is a SHORT action.
BrandOuterimpact #ad
ManufacturerOuterimpact #ad
Length6 Inches
Weight0.3 ounces
Part NumberOTL-SAVS-PCAT02